First we will identify and correct the root cause of the mould. We follow this with a two part treatment to eliminate the mould and sanitize the area ensuring all mould spores are killed. further to this Anti mould additives can be used in paints to stop future spread.

Mould must be dealt with as quickly as possible as it is detrimental to health, especially in children.

To rectify rising damp, we will use a silicon based chemical Injection that soaks through the mortar to create a water repellent barrier.

We will then use a salt neutraliser to clean the brick work before plastering.

Condensation is by far the biggest cause of mould in properties. It’s highly important to maintain adequate air flow.

We will identify air flow problems and install trickle vents and air vents where necessary.

We also offer internal wall insulation when the temperature of the walls are particularly cold.

For this service we use Ultrotherm; a thin internal insulation that is fitted over your existing wall then plastered to a smooth finish.

It is an equivalent product to 35mm Thermal board, but at only 12mm thick less intrusive on your space, which can make all the difference in smaller rooms.

We can identify weaknesses in the external walls that can allow water to pass through to the interior of the building.

This could be a range of issues such as; cracks in render or brick work, windows and doors in need of resealing, repairs to guttering.

This can be followed by the use of breathable paints or clear sealers to brick work.

an uninsulated loft is one of the quickest ways to lose heat from your property. I well insulated loft will not only help prevent damp and mould but assist in reducing energy bills.

We offer rock wool insulation that can be fitted with very little disruption.